Filter
Top Products
Removing Used Ribbon (105Se)
To remove used ribbon, refer to Figure 2.9 and follow the steps below.
1. Pull the hook out slightly, then rotate the hook back-and-forth several
times as shown and remove it from the spindle.
2. Grasp the used ribbon and remove it from the Ribbon Take-Up Spindle.
3. Remove the empty core from the Ribbon Supply Spindle.
4.FollowtheRibbonLoadingprocedureonpage2-4toloadthenewrib-
bon.
2-12 Zebra S-Series User’s Guide
Figure 2.8 Fanfold Media Loading Diagrams (160S)
Figure 2.9 Removing Used Ribbon (105Se)
34