Zebra Technologies Zebra Z4000 Printer User Manual


 
Communication Interfaces
Data cables must be fully shielded and fitted with metal or metalized
connector shells to prevent radiation and reception of electrical noise.
To minimize electrical noise pickup in the cable:
Keep data cables as short as possible.
Do not bundle the data cables tightly with power cords.
Do not tie the data cables to power line conduits.
Serial Data Communications
Table 11 illustrates the pin connections on the DB-25 connector at the
rear of the printer.
Z Series™ User’s Guide 71
Appendix B
Table 11. Rear Panel Serial Data Port Pinout