Zebra Technologies Zebra Z6000 Printer User Manual


 
Roll Media Loading
To load roll media, refer to Figure 3.
1. Place the roll of media on the Media Supply Hanger(i) and push it
on all the way.
2. Fold the Media Supply Guide(g) up and slide it against the outer
edge of the media roll.
3. Feed the media under the Media Spindle(j), under the Ribbon Sen-
sor(k), and out the front of the printer.
4. Slide the Media Guide(h) in until it is against the outer edge of the
media.
5. Close the Printhead Assembly and the Media Cover, or continue to
"Loading Ribbon".
Fanfold Media Loading
To load fanfold media, place the media behind the printer and refer to
Figure 4.
1. Pass the fanfold media over the Media Supply Hanger(i).
2. Fold the Media Supply Guide(g) up and slide it against the outer
edge of the media.
3. Feed the media under the Media Spindle(j), under the Ribbon Sen-
sor(k), and out the front of the printer.
4. Slide the Media Guide(h) against the outer edge of the media.
5. Close the Printhead Assembly and the Media Cover, or continue to
"Loading Ribbon".
6 Z Series™ User’s Guide
g
k
i
h
j
Figure 3. Roll Media Loading
14
H:...uspiran2.vp
Thu Jul 02 09:48:45 1998
Color profile: Disabled
Composite Default screen