Filter
Top Products
40 Z Series™ User’s Guide
Printer Self-Tests
The Z Series™ printer is designed to work with most Zebra media and
ribbon combinations, right out of the box. However, in some applica-
tions, changes to the printer’s configuration and mechanical settings
may be required. For these situations, printer self-test labels can be
used to check print quality and insure proper operation.
These self-tests produce sample printouts and provide specific informa-
tion which helps determine the operating conditions for the printer.
Each self-test is enabled by pressing a specific Front Panel key or com-
bination of keys while turning the AC Power Switch ON. Keep the
key(s) pressed until the first front panel LED turns OFF. Once the
Power-On Self Test is completed, the selected self test begins automati-
cally.
NOTES: Prior to performing self-tests, disconnect all data interface
cables from the printer.
When canceling a self-test prior to its actual completion, always turn the
printer power OFF and then back ON to restart the printer.
48
H:...uspiran2.vp
Thu Jun 18 16:02:06 1998
Color profile: Disabled
Composite Default screen