Zebra Technologies Zebra Z6000 Printer User Manual


 
Loading Ribbon
NOTE: The Ribbon Supply Spindle in your printer may be a
"Dual-Tension" variety. Most applications require the spindle to be in the
"Normal" position. The "Low-Tension" position is recommended only when
wide ribbons are used and normal tension hampers the ribbon movement.
To place this spindle in the "Normal" position, firmly pull out on the
Spindle End-Capuntil itclicks intoplace asshown inFigure 5a.To place
the spindle in the "Low-Tension" position, firmly push in on the Spindle
End-Cap until it clicks into place.
Z Series™ User’s Guide 7
g
h
j
k
i
Figure 4. Fanfold Media Loading
Low Tension Position
SPINDLE END-CAP
RETRACTED
SPINDLE END-CAP
EXTENDED
Normal Position
Figure 5a. Ribbon Supply Spindle Positioning
15
H:...uspiran2.vp
Thu Jul 02 09:48:48 1998
Color profile: Disabled
Composite Default screen