Filter
Top Products
10 IG-4160 Zoom Internet Gateway User Guide
D
DD
D
Turn the modem back on. If you are using a cable or DSL
modem, wait until it synchronizes itself with the modem
service. (You’ll know it’s synchronized when the cable
modem’s light goes from blinking to steady.)
E
EE
E
Plug the Gateway in: Plug one end of its power adapter into
the 12VDC power jack on the back of the Gateway and
then plug the other end into a wall outlet. The Gateway’s
SYS indicator will come ON for about 10 seconds, and
then it will flash rapidly a few times. When the indicator
flashes continuously once per second, the start-up process
is complete, and your Gateway is ready.
F
FF
F
Note: If you are using a cable modem and your service
provider has instructed you to call back with your
Gateway’s WAN MAC address, now is the time to do so.
Turn your computer back on and restart it.