Filter
Top Products
42 IG-4160 Zoom Internet Gateway User Guide
5.2 Performing System Administration
Tasks
Clicking the Toolbox icon at the top of any Gateway user interface
screen brings up the Administrator Toolbox, from which you can
monitor or change several system administration-type settings.
For example, you can
•
Change the Administrator’s password.
Type the existing password, then type the new password twice
(once for verification purposes). If you change your password
and then forget it, your only recourse is to reset it to the
default by performing a “hard” system reset (see page 44).
•
Change the duration of the Administrator Timeout setting.
Adminstrator Timeout is the length of time that an
administrator connected to the Gateway can be idle before
being automatically logged out. The default is 600 seconds (10
minutes). To disable this feature, type 0. The maximum
timeout is 9,999 seconds (2 hours, 46 minutes).
•
Change the IP address of the Remote Administrator Host.
Check the Enable box next to the Remote Administrator
Host item if you want to perform administration tasks from
outside your private LAN. The default is 0.0.0.0, which means