Filter
Top Products
44 IG-4160 Zoom Internet Gateway User Guide
The Gateway’s user interface uses four basic buttons, which are
listed in the table below.
BUTTON FUNCTION
Save
To save changes.
Undo
To undo any changes and start over.
Restart
To restart the Gateway.
Tip:
You must restart the Gateway if you have
changed your type of Internet access method
(WAN type). In all other instances, you will be
prompted if you need to restart the Gateway.
Help
Clicking the
Help
icon at the top of any screen
displays the Gateway’s context-sensitive help.
Note:
We strongly recommend that you change the administrator
password to safeguard the security of your network.
5.3 Resetting the Gateway to Its Default
Settings
If you lose your Gateway link and cannot communicate with it, you
can re-establish a connection by performing a “hard” reset to the
factory default settings.
•
Unplug the Gateway’s power adapter.
•
Using a paper clip, press the Reset button on the Gateway’s
front panel. While holding in the Reset button, plug the power
adapter back in, count to 8, and then release the button. The
Gateway’s SYS LED will blink quickly eight to ten times and
then it will blink slowly, about once per second. You are now
guaranteed that all system settings are set to the Gateway’s
factory defaults.
Note: The Gateway’s default IP address is 192.168.123.254.