Filter
Top Products
Chapter 4: Advanced Setup Options 35
1
11
1
Open the Gateway’s Advanced Setup screen by clicking the
same-named icon at the top of the main interface window, and
click the LAN MAC Address Control button. Then check the
MAC Access Control Enable box.
2
22
2
Specify which devices you want to be able to connect or
associate with the Gateway by checking the accompanying
Enable boxes and selecting allow or deny from the
dropdown lists.
3
33
3
Define the LAN MAC address and IP address pairs. Use the
Prev Page and Next Page buttons to scroll the list of pairs.
(The Gateway can hold a maximum of 32 pairs.) Use the
DHCP clients dropdown list to find LAN MAC addresses
known to the DHCP server. Check the Conn. (connection)
boxes for each LAN client. Note: The Assoc. box is not
activated on your IG-4160.
4
44
4
Click Save to save your changes (or Undo to start over).
The following table lists what a client can and cannot do when
Conn. is enabled or disabled.
Connection Definition
Connection checked Full access to the Internet and all
network resources
Connection not checked
Can communicate with other LAN
clients, but cannot connect to the
Internet, use the print server
function, or communicate with the
Gateway