Filter
Top Products
ZyWALL 10/50 Internet Security Gateway
Filter Configuration 18-9
Table 18-3 TCP/IP Filter Rule Menu Fields
FIELD DESCRIPTION OPTIONS
Port # Comp Select the comparison to apply to the destination port in the packet
against the value given in Destination: Port #.
None
Less
Greater
Equal
Not Equal
Source
IP Address Enter the source IP Address of the packet you wish to filter. This
field is ignored if it is 0.0.0.0.
0.0.0.0
IP Mask
Enter the IP mask to apply to the Source: IP Addr.
0.0.0.0
Port # Enter the source port of the packets that you wish to filter. The
range of this field is 0 to 65535. This field is ignored if it is 0.
0-65535
Port # Comp Select the comparison to apply to the source port in the packet
against the value given in Source: Port #.
None
Less
Greater
Equal
Not Equal
TCP Estab This field is applicable only when the IP Protocol field is 6, TCP. If
Yes, the rule matches packets that want to establish a TCP
connection (SYN=1 and ACK=0); if No, it is ignored.
Yes
No
More
If Yes, a matching packet is passed to the next filter rule before an
action is taken; if No, the packet is disposed of according to the
action fields.
If More is Yes, then Action Matched and Action Not Matched will
be N/A.
Yes
No
Log Select the logging option from the following:
None – No packets will be logged.
Action Matched - Only packets that match the rule parameters will
be logged.
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
Both – All packets will be logged.
None
Action Matched
Action Not
Matched
Both
Action
Matched
Select the action for a matching packet.
Check Next Rule
Forward