ZyXEL Communications 10 Network Router User Manual


 
ZyWALL 10/50 Internet Security Gateway
22-6 System Maintenance & Information
Table 22-3 Time and Date Setting Fields
FIELD DESCRIPTION
Enter the time service protocol that your time server sends when you turn on the
ZyWALL. Not all time servers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works. The
main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of seconds
since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
Use Time Server
when Bootup
None uses no time server. Enter the time and date manually in the New Time and
New Date fields.
Time Server IP
Address
Enter the IP address of your time server. Check with your ISP/network administrator
if you are unsure of this information.
Current Time This field displays an updated time only when you reenter this menu.
New Time Enter the new time in hour, minute and second format.
Current Date This field displays an updated date only when you reenter this menu.
New Date Enter the new date in year, month and day format.
Time Zone Press [SPACE BAR] to set the time difference between your time zone and
Greenwich Mean Time (GMT).
Daylight Saving Daylight Saving Time is a period from late spring to early fall when many countries
set their clocks ahead of normal local time by one hour to give more daylight time in
the evenings. If you use daylight savings time, then choose Yes.
Start Date
Enter the month and day that your daylight-savings time starts on if you selected Yes
in the Daylight Saving field.
End Date
Enter the month and day that your daylight-savings time ends on if you selected Yes
in the Daylight Saving field.
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to
Cancel“ to save your configuration, or press [ESC] to cancel.
22.3.1 Resetting the Time
The ZyWALL resets the time in three instances:
i. On leaving menu 24.10 after making changes.