Filter
Top Products
ZyWALL 10/50 Internet Security Gateway
20-2 System Information & Diagnosis
Step 2. In this menu, enter 1 to open System Maintenance - Status.
Step 3. There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the
WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.
Figure 20-2 Menu 24.1 — System Maintenance — Status
The following table describes the fields present in Menu 24.1 - System Maintenance - Status. These fields
are READ-ONLY and are meant to be used for diagnostic purposes. The upper right corner of the screen
shows the time and date according to the format you set in menu 24.10.
Table 20-1 System Maintenance — Status Menu Fields
FIELD DESCRIPTION
Port This is the WAN or the LAN port.
Status
Shows the port speed and duplex setting if you’re using Ethernet
Encapsulation and Down (line is down), idle (line (ppp) idle), dial (starting to
trigger a call) and drop (dropping a call) if you’re using PPPoE
Encapsulation.
TxPkts The number of transmitted packets on this port.
RxPkts The number of received packets on this port.
Cols The number of collisions on this port.
Menu 24.1 - System Maintenance - Status 23:10:28
Sat. Jan. 01, 2000
Port
WAN
LAN
Status
10M/Half
10M/Half
TxPkts
67
299
RxPkts
289
220
Cols
0
0
Tx B/s
74
74
Rx B/s
64
64
Up Time
2:20:56
2:20:54
Port:
WAN
LAN
Ethernet Address
00:a0:c5:21:8c:a3
00:a0:c5:21:8c:a2
IP Address
x.y.155.97
192.168.1.1
IP Mask
255.255.255.0
255.255.255.0
DHCP
Client
Server
System up Time: 22:11:43
Name:
Routing: IP
ZyNOS F/W Version: V3.50(WC.2)b2 | 02/07/2002
Press Command:
COMMANDS: 1-Drop WAN 9-Reset Counters ESC-Exit