Filter
Top Products
ZyWALL 10/50 Internet Security Gateway
System Information & Diagnosis 20-13
Figure 20-11 WAN & LAN DHCP
The following table describes the diagnostic tests available in menu 24.4 for your ZyWALL and associated
connections.
Table 20-4 System Maintenance Menu Diagnostic
FIELD DESCRIPTION
Ping Host Enter 1 to ping any machine (with an IP address) on your LAN or
WAN. Enter its IP address in the Host IP Address field below.
WAN DHCP Release Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal Enter 3 to renew your WAN DHCP settings.
Internet Setup Test Enter 4 to test the Internet Setup. You can also test the Internet Setup
in Menu 4 - Internet Access. Please refer to the Internet Access
chapter for more details. This feature is only available for dial-up
connections using PPPoE or PPTP encapsulation.
Reboot System Enter 11 to reboot the ZyWALL.
Host IP Address=
If you entered 1 in the Host IP Address field above, then enter the IP
address of the machine you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.