Filter
Top Products
ZyWALL 10/50 Internet Security Gateway
Initial Setup 3-3
3.2.1 Main Menu
After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
Figure 3-3 ZyWALL Main Menu
3.2.2 System Management Terminal Interface Summary
Table 3-2 Main Menu Summary
NO. MENU TITLE FUNCTION
1 General Setup Use this menu to set up administrative information and dynamic DNS.
2 WAN Setup Use this menu to clone a MAC address from a computer on your LAN.
3 LAN Setup Use this menu to configure LAN DHCP and TCP/IP settings as well as
apply LAN filters.
4 Internet Access Setup Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
11 Remote Node Setup Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
12 Static Routing Setup Configure IP static routes in this menu.
15 NAT Setup Use this menu to configure Network Address Translation.
21 Filter and Firewall Setup Configure filters, activate/deactivate the firewall and view the firewall log.
22 SNMP Configuration Use this menu to configure SNMP-related parameters.
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ZyWALL 10/50 Main Menu
Getting Started Advanced Management
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
Enter Menu Selection Number: