Filter
Top Products
ZyWALL 10/50 Internet Security Gateway
5-6 LAN Setup
Figure 5-6 Menu 3.2 — TCP/IP and DHCP Ethernet Setup
Follow the instructions in the next table on how to configure the DHCP fields.
Table 5-3 DHCP Ethernet Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
DHCP This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays
requests and responses between the remote server and the clients.
When set to Server, the following four items need to be set:
Server
Configuration:
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP address
pool.
192.168.1.33
Size of Client IP
Pool
This field specifies the size, or count of the IP address pool. 32
Primary DNS
Server
Secondary DNS
Server
Type in the IP addresses of the DNS servers. The DNS servers are passed
to the DHCP clients along with the IP address and the subnet mask.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
DHCP Server Address= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
First address
in the IP Pool
Size of the IP
Pool
IP addresses
of the DNS
servers