Filter
Top Products
Prestige 623ME-T User’s Guide
Remote Node Configuration 14-3
Figure 14-2 Menu 11.1 Remote Node Profile
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
Table 14-1 Menu 11.1 Remote Node Profile
FIELD DESCRIPTION EXAMPLE
Rem Node Name Type a unique, descriptive name of up to eight characters for this
node.
MyISP
Active
Press [SPACE BAR] and then [ENTER] to select Yes to activate or
No to deactivate this node. Inactive nodes are displayed with a minus
sign “–“ in SMT menu 11.
Yes
Encapsulation Select the encapsulation type your ISP uses
PPPoE - A dial up connection that uses PPPoE encapsulation and
requires a username and password.
RFC 1483 - An always up connection that uses the RFC1483
protocol.
PPPoE
Multiplexing Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either VC-based or LLC-based.
LLC-based
Service Name
When using PPPoE encapsulation, type the name of your PPPoE
service here.
N/A
Incoming:
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Service Name= N/A
Incoming: Telco Option:
Rem Login= N/A Allocated Budget(min)= N/A
Rem Password= N/A Period(hr)= N/A
Outgoing: Schedule Sets= N/A
My Login= N/A Nailed-Up Connection= N/A
My Password= N/A Session Options:
Authen= N/A Edit Filter Sets= No
Idle Timeout(sec)= N/A
Press ENTER to Confirm or ESC to Cancel:
Edit IP/Bridge Options
in menu 11.3.
Edit ATM Options in
menu 11.6
Edit Filter Sets in
menu 11.5.