Filter
Top Products
Prestige 623ME-T User’s Guide
Wizard Setup 3-7
Table 3-3 Internet Connection with PPPoE
LABEL DESCRIPTION
Modem Type This field displays the protocol selected in the previous wizard screen.
Protocol This field displays the encapsulation used for the protocol selected in the previous wizard
screen.
Service Name Type the name of your PPPoE service here.
User Name
Configure User Name and Password fields for PPPoE encapsulation only. Enter the user
name exactly as your ISP assigned. If assigned a name in the form user@domain
where
domain identifies a service name, then enter both components exactly as given.
Password Enter the password associated with the user name above.
IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed;
the ISP assigns you a different one each time you connect to the Internet. The Single User
Account feature can be used with either a dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a dynamic IP address; otherwise
select Static IP Address and type your ISP assigned IP address in the IP Address text box
below.
Connection
Connect on Demand: Max. Idle Time specifies an idle time-out (in seconds). The default
setting for this field is, which means the Internet session does not timeout.
The schedule rule(s) in SMT menu 26 has priority over your Connection settings.
Back
Click Back to go back to the first wizard screen.
Finish
Click Finish to save and complete the wizard setup.
3.10 DHCP Setup
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the Prestige as a DHCP server or disable
it. When configured as a server, the Prestige provides the TCP/IP configuration for the clients. If you turn
DHCP service off, you must have another DHCP server on your LAN, or else the computer must be
manually configured.