Filter
Top Products
Prestige 623ME-T User’s Guide
14-8 Remote Node Configuration
Table 14-2 Menu 11.3 Remote Node Network Layer Options
FIELD DESCRIPTION EXAMPLE
Version Press [SPACE BAR] and then [ENTER] to select the RIP version. Options
are RIP-1, RIP-2B or RIP-2M.
RIP-1
Multicast
IGMP-v1 sets IGMP to version 1, IGMP-v2 sets IGMP to version 2 and
None disables IGMP.
None
IP Policies You can apply up to four IP Policy sets (from 12) by typing in their numbers
separated by commas. Configure the filter sets in menu 25 first (see the IP
Policy Routing chapter) and then apply them here.
3, 4, 5, 6
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
14.4.1 My WAN Addr Sample IP Addresses
The following figure uses sample IP addresses to help you understand the field of My WAN Addr in menu
11.3. Refer to the previous LAN and WAN IP Addresses figure in the web configurator chapter on LAN
setup for a brief review of what a WAN IP is. My WAN Addr indicates the local Prestige WAN IP
(172.16.0.1 in the following figure) while Rem IP Addr indicates the peer WAN IP (172.16.0.2 in the
following figure).
Figure 14-4 Sample IP Addresses for a TCP/IP LAN-to-LAN Connection