Filter
Top Products
Prestige 623ME-T User’s Guide
24-4 IP Policy Routing
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu
allows you to configure a policy rule.
Figure 24-3 Menu 25.1.1 IP Routing Policy
The following table describes the fields in this menu.
Table 24-2 Menu 25.1.1 IP Routing Policy
FIELD DESCRIPTION
Policy Set Name
This is the policy set name assigned in Menu 25 – IP Routing Policy Setup.
Active
Press [SPACE BAR] and then [ENTER] to select Yes to activate or No to
deactivate the policy. Inactive policies are displayed with a minus sign “-“ in
SMT menu 25.
Criteria :
IP Protocol
IP layer 4 protocol, for example, UDP, TCP, ICMP, etc.
Type of Service
Prioritize incoming network traffic by choosing from Don’t Care, Normal, Min
Delay, Max Thruput, Min Cost or Max Reliable.
Precedence Precedence value of the incoming packet. Press [SPACE BAR] and then
[ENTER] to select a value from 0 to 7 or Don’t Care.
Packet Length
Type the length of incoming packets (in bytes). The operators in the Len
Comp (next field) apply to packets of this length.
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Normal Packet length= 40
Precedence = 0 Len Comp= N/A
Source:
addr start= 1.1.1.1 end= 1.1.1.1
port start= 20 end= 20
Destination:
addr start= 2.2.2.2 end= 2.2.2.2
port start= 20 end= 20
Action= Matched
Gateway addr = 192.168.1.1 Log= No
Type of Service= Max Thruput
Precedence = 0
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.