Filter
Top Products
Prestige 645R-A Series User’s Guide
Remote Node Configuration 13-9
13.4.1 My WAN Addr Sample IP Addresses
The following figure uses sample IP addresses to help you understand the field of My Wan Addr in menu
11.3. Refer to the previous LAN and WAN IP Addresses figure in the web configurator chapter on LAN
setup for a brief review of what a WAN IP is. My WAN Addr indicates the local Prestige WAN IP
(172.16.0.1 in the following figure) while Rem IP Addr indicates the peer WAN IP (172.16.0.2 in the
following figure).
Figure 13-4 Sample IP Addresses for a TCP/IP LAN-to-LAN Connection
13.5 Remote Node Filter
Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to display Menu 11.5 – Remote Node Filter.
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.