Filter
Top Products
Prestige 645R-A Series User’s Guide
9-2 Introducing the SMT
Menu 3
Ethernet Setup
Menu 4
Internet Access Setup
Menu 11
Remote Node Setup
Menu 12
Static Route Setup
Menu 11.5
Remote Node Filter
Menu 12.1
IP Static Route Setup
Menu 11.1
Remote Node Profile
Menu 3.1
General Ethernet Setup
Menu 11.3
Remote Node Network
Layer Options
Menu 3.2.1
IP Alias Setup
Prestige Main Menu
Menu 1
General Setup
Menu 15
NAT Setup
Menu 21
Filter Set Configuration
Menu 21.x
Filter Rules Summary
Menu 21.x.1
TCP/IP Filter Rule
Menu 21.x.1
Generic Filter Rule
Menu 11.6
Remote Node ATM
Layer Options
Menu 12.3
Bridge Static
Route Setup
Menu 12.1.1
Edit IP Static Route
Menu 12.3.1
Edit Bridge
Static Route
Menu 15
NAT Setup
Menu 15.1
Address Mapping Sets
Menu 15.2
NAT Server Sets
Menu 15.2.x
NAT Server Setup
Menu 15.1.x
Address Mapping Rules
Menu 24.7.1
System Maintenance --
Upload System Firmware
Menu 24.7.2
System Maintenance --
Upload System
Configuration File
Menu 22
SNMP Configuration
Menu 23
System Password
Menu 24
System Maintenance
Menu 25
IP Routing Policy Setup
Menu 25.1
IP Routing Policy Setup
Menu 25.1.1
IP Routing Policy
Menu 24.1
System Maintenance --
Status
Menu 24.3
System Maintenance --
Log and Trace
Menu 24.4
System Maintenance --
Diagnostic
Menu 24.5
System Maintenance --
Backup Configuration
Menu 24.6
System Maintenance --
Restore Configuration
Menu 24.7
System Maintenance --
Upload Firmware
Menu 24.8
Command Interpreter
Mode
Menu 24.3.1
System Maintenance --
View Error Log
Menu 24.3.2
System Maintenance --
UNIX Syslog
Menu 24.2.1
System Maintenance --
Information
Menu 24.2.2
System Maintenance --
Change Console Port
Speed
Menu 24.2
System Information and
Console Port Speed
Menu 26
Schedule Setup
Menu 26.x
Schedule Set Setup
Menu 1.1
Configure Dynamic DNS
Menu 3.2
TCP/IP and DHCP
Ethernet Setup
Menu 15.1.x.x
Address Mapping Rule
Figure 9-2 Prestige 645R-A1 SMT Menu Overview
9.2 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are
listed in the table below.