Filter
Top Products
ES-3148 User’s Guide
182 Chapter 26 Maintenance
Figure 95 Reboot System: Confirmation
2 Click OK to display the screen shown next.
Figure 96 Reboot System: Start
3 Click OK again and then wait for the switch to restart. This takes up to two minutes. This
does not affect the switch’s configuration.
26.7 FTP Command Line
This section shows some examples of uploading to or downloading files from the switch using
FTP commands. First, understand the filename conventions.
26.7.1 Filename Conventions
The configuration file (also known as the romfile or ROM) contains the factory default
settings in the screens such as password, switch setup, IP Setup, etc.. Once you have
customized the switch's settings, they can be saved back to your computer under a filename of
your choosing.
ZyNOS (ZyXEL Network Operating System sometimes referred to as the “ras” file) is the
system firmware and has a “bin” filename extension.
Table 59 Filename Conventions
FILE TYPE
INTERNAL
NAME
EXTERNAL
NAME
DESCRIPTION
Configuration File config This is the configuration filename on the switch.
Uploading the config file replaces the specified
configuration file system, including your switch
configurations, system-related data (including the
default password), the error log and the trace log.
Firmware Ras *.bin This is the generic name for the ZyNOS firmware on
the switch.