Filter
Top Products
ES-3148 User’s Guide
216 Chapter 31 Introducing the Commands
timesync <daytime|time|ntp>
Sets the time server protocol.
server <ip>
Sets the IP address of your time
server.
loginPrecedence <LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the
switch should use (first) to
authenticate a user.
bcp-
transparency
Enables Bridge Control Protocol
(BCP) transparency.
queue level <0-7> priority
<0-7>
Sets the priority level-to-
physical queue mapping.
storm-control
Enables broadcast storm
control on the switch.
bandwidth-
control
Enables bandwidth control.
mac-aging-time <10-3000>
Sets learned MAC aging time.
snmp-server get-community
<property>
Sets the get community.
set-community
<property>
Sets the set community.
trap-community
<property>
Sets the trap community.
trap-destination
<ip>
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
[contact <system
contact>] [location
<system location>]
Sets the geographic location
and the name of the person in
charge of this switch.
logins username <name>
password <pwd>
Configures up to four read-only
login accounts.
service-control icmp
Allows ICMP access for
services such as Ping.
snmp
Allows SNMP management.
http <socket-number>
<timeout>
Allows HTTP access on the
specified service port and
defines the timeout period.
telnet <socket-
number>
Allows Telnet access on the
specified service port.
ftp <socket-number>
Allows FTP access on the
specified service port.
ssh <socket-number>
Allows SSH access on the
specified service port.
https <socket-
number>
Allows HTTPS access on the
specified service port.
remote-
management
<index>
Enables a specified secured
client set.
Table 69 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION