Filter
Top Products
ES-3148 User’s Guide
212 Chapter 31 Introducing the Commands
address default-
gateway
<ip>
Sets the default gateway's IP
address for the out-of-band
management port.
address <ip> <mask>
Sets the IP address and subnet
mask of the out-of-band
management port.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id> interface
<interface-id>
Configures a static MAC
address forwarding rule.
inactive
Disables a static MAC address
forwarding rule.
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop <src/
dst/both>
Configures a static MAC
address port filtering rule.
inactive
Disables a static MAC address
port filtering rule.
mirror-port
Enables port mirroring.
<port-num>
Sets a monitor port (the port to
which traffic is copied for
analysis).
lacp
Enables Link Aggregation
Control Protocol (LACP).
system-priority <1-65535>
Sets the priority of an active port
using LACP.
trunk <T1|T2|T3|T4|T5|T6>
Activates a trunk group.
<T1|T2|T3|T4|T5|T6>
lacp
Enables LACP for a trunk
group.
<T1|T2|T3|T4|T5|T6>
interface <port-
list>
Adds a port(s) to the specified
trunk group.
interface <port-
list> timeout <lacp-
timeout>
Defines the port number and
LACP timeout period.
cluster <vlan-id>
Sets the cluster management
VLAN ID.
name <cluster name>
Configures a name to identify
the cluster manager.
member <mac-address>
password <password-
str>
Sets the cluster member
switch's hardware MAC address
and password.
rcommand <mac-
address>
Logs into a cluster member
switch.
Table 69 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION