Filter
Top Products
ES-3148 User’s Guide
Chapter 31 Introducing the Commands 217
<index> start-addr
<ip> end-addr <ip>
service <[telnet]
[ftp] [http] [icmp]
[snmp] [ssh]
[https]>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
admin-password <pw-string>
<confirm-string>
Changes the administrator
password.
vlan-stacking
Enables VLAN stacking on the
switch.
<SPTPID>
Sets the SP TPID (Service
Provider Tag Protocol Identifier).
default-
management
<in-band|out-of-
band>
Specifies through which traffic
flow the switch is to send
packets.
ssh known-hosts <host-
ip> <1024|ssh-
rsa|ssh-dsa> <key>
Adds a remote host to which the
switch can access using SSH
service.
https cert-regeneration
<rsa|dsa>
Re-generates a certificate.
timeout <0-65535>
Sets the HTTPS timeout period.
multi-login
Enables multi-login.
mvr <vlan-id>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See Section 31.9.6 on page 223
for more information.
dhcp-relay
Enables DHCP relay.
helper-address
<svr_ip> [svr2_ip]
[svr3_ip]
Sets the IP addresses of up to 3
DHCP servers.
option
Allows the switch to add DHCP
relay agent information.
information
Allows the switch to add system
name to agent information.
Table 69 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION