Filter
Top Products
ES-3148 User’s Guide
208 Chapter 31 Introducing the Commands
31.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
Table 69 Command Summary: Configuration Mode
COMMAND DESCRIPTION
help
Displays help information.
logout
Exits from the CLI.
history
Displays a list of previous
command(s) that you have
executed.
exit
Exits from the CLI.
mode zynos
Changes the CLI mode to the
ZyNOS format.
password <password>
Change the password for
Enable mode.
no ip
Sets the management IP
address to the default value.
route <ip> <mask>
Removes a specified IP static
route.
route <ip> <mask>
inactive
Enables a specified IP static
route.
igmp-filtering
Clears the IGMP filtering
settings on the switch.
profile <name>
Deletes the IGMP filtering
profile.
profile <name>
start-address
<ip> end-address
<ip>
Deletes a rule in the IGMP
filtering profile.
igmp-snooping
Disables IGMP snooping.
mac-forward mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
mac-filter mac <mac-addr>
vlan <vlan-id>
inactive
Enables the specified MAC-filter
rule.
mac <mac-addr>
vlan <vlan-id>
Disables the specified MAC
filter rule.
mirror-port
Disables port mirroring on the
switch.