Filter
Top Products
ES-3148 User’s Guide
220 Chapter 31 Introducing the Commands
dir
<ingress|egress|bo
th>
Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
speed-duplex <auto|10-half|10-
full|100-half|100-
full|1000-full>
Sets the duplex mode (half or
full) and speed (10, 100 or
1000 Mbps) of the connection
on the interface. Selecting
auto (auto-negotiation) makes
one port able to negotiate with a
peer automatically to obtain the
connection speed and duplex
mode that both ends support.
bpdu-control
<peer|tunnel|discard
|network>
Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
no egress set <port-
list>
Disables the outgoing traffic port
list for a port-based VLAN.
igmp-immediate-
leave
Disables IGMP immediate leave
on the port.
igmp-filtering
profile
Disables IGMP filtering on the
port.
igmp-group-limited
Disables IGMP group limitation.
ingress-check
Disables ingress checking on
the port(s).
gvrp
Disable GVRP on the port(s).
flow-control
Disables flow control on the
port(s).
vlan-trunking
Disables VLAN trunking on the
port(s).
mirror
Disables port mirroring on the
port(s).
bandwidth-limit
Disables bandwidth limit on the
port(s).
broadcast-limit
Disables broadcast storm
control limit on the switch.
multicast-limit
Disables multicast limit on the
switch.
dlf-limit
Disables destination lookup
failure (DLF) limit on the switch.
inactive
Enables the port(s) on the
switch.
intrusion-lock
Disables intrusion-lock on a port
so that a port can be connected
again after you disconnected
the cable.
Table 70 interface port-channel Commands (continued)
COMMAND DESCRIPTION