Filter
Top Products
ES-3148 User’s Guide
Chapter 32 Command Examples 231
2 Enter write memory to save the changes to the current configuration file. If you want to
reset the second configuration file, use the
write memory command again with the
specified index number.
The following example resets both configuration files to the factory default settings.
Figure 124 CLI: Reset to the Factory Default Example
32.7 no Command Examples
These are the commonly used command examples that belong to the no group of commands.
32.7.1 no mirror-port
Syntax:
no mirror-port
Disables port mirroring on the switch.
An example is shown next.
Figure 125 no mirror-port Command Example
32.7.2 no https timeout
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
ras# erase running-config
ras# write memory
ras# write memory 2
ras(config)# no mirror-port