ZyXEL Communications NSA210 Server User Manual


 
Chapter 3 NAS Starter Utility for NSA210
Media Server User’s Guide
34
3.5 Initialization Wizard
Use these screens to set up the NSA for the first time. The wizard will configure the NSA’s basic
settings. It also installs the firmware on the hard disk.
Click Run the Initialization Wizard in the main utility screen to display the following screen.
You must log in using an admin account. The default administrator username is ‘admin’ and the
default password is ‘1234’ and click Next.
Figure 18 Initialization Wizard Welcome
Show the directory
of the NSA
Click this to open the NSA’s file directory in Windows Explorer. See Section 3.5.3 on page
42 for details.
Run the
Initialization
Wizard
Click this to set up the NSA for the first time. See Section 3.5 on page 34 for details.
Configure network
setting
Click this to change the NSA network settings such as the NSA’s name, IP address,
subnet mask, default gateway, DNS, or PPPoE. See Section 3.9 on page 45 for details.
Table 6 NAS Starter Utility Main Screen
LABEL DESCRIPTION