Filter
Top Products
Chapter 3 NAS Starter Utility for NSA210
Media Server User’s Guide
32
3.3 NAS Discovery Screen
Use this screen to view the NSAs in your network. The NSA’s Server Name. The default is ‘nsa’
followed by the number of your model (‘nsa210’ for example). See Section 3.9 on page 45 for how
to change it to a more recognizable one in your network.
Start the NAS Starter Utility (click the icon in your Desktop or in Start > Programs > ZyXEL >
NAS Starter Utility). The first time you open the NAS Starter Utility the discovery screen appears
as follows.
Figure 16 NAS Discovery
The following table describes the labels in this screen.
Table 5 NAS Discovery
LABEL DESCRIPTION
Refresh Click this to refresh the screen. The NAS Starter Utility does not automatically refresh.
Hostname This is the server name you configured for the NSA. If you have more than one NSA in
your network, it is recommended that you give each one a unique name for identification
purposes.
If you have several NSAs connected to your computer/network, hover your mouse over
the host name to view the details of each device. A box pops up containing details about
the NSA.
Hostname shows the NSA’s configured server name.
IP shows the NSA’s current IP address.
Model ID shows the NSA’s model name.
Firmware Version shows the version of firmware the NSA is currently using.
Status shows whether the NSA is Online, Unreachable, Configuring, or Config
Failed.