Chapter 18 Maintenance Screens
Media Server User’s Guide
331
Click Maintenance > FW Upgrade to open the following screen.
Figure 212 Maintenance > FW Upgrade
The following table describes the labels in this screen.
18.8 The Shutdown Screen
Use this screen to turn off the NSA or perform a software restart. A software restart is faster than
turning the NSA off and then turning it on again. Before shutting down or restarting, check the
System Status > Active Sessions screen to make sure that no one is logged into the NSA or
transferring files to or from the NSA.
Table 120 Maintenance > FW Upgrade
LABEL DESCRIPTION
Firmware File Type the location of the firmware file you want to upload
Browse Click this to find the file on your computer
Upload Click this to upload the new firmware. The NSA automatically restarts after you
upgrade. Wait until the restart completes before accessing the NSA again. If you
interrupt the upgrade, then the NSA may become unusable. See Section 21.1 on page
361 for your model’s LED behavior during firmware upgrade.
Reset Click this to refresh the screen.
Periodically Check for
Latest Firmware
Automatically
Select this to have the NSA regularly check ZyXEL’s server for updated firmware. The
NSA notifies you at login if a new firmware is available.
Click Apply to save this field’s setting.
Check for Latest
Firmware Now
Click this to check ZyXEL’s server for updated firmware.