Filter
Top Products
Prestige 791R G.SHDSL Router
10-2 Bridging Setup
Figure 10-1 Remote Node Bridging Options
Table 10-1 Remote Node Bridging Options
FIELD DESCRIPTION
Bridge (menu 11.1)
Make sure this field is set to Yes.
Edit IP/Bridge (menu
11.1)
Press [SPACE BAR] to select Yes and press [ENTER] to display menu 11.3.
Ethernet Addr Timeout
(min.) (menu 11.3)
Type the time (in minutes) for the Prestige to retain the Ethernet Address
information in its internal tables while the line is down. If this information is
retained, your Prestige will not have to recompile the tables when the line
comes back up.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
10.2.2 Bridge Static Route Setup
Similar to IP layer static routes, a bridging static route tells the Prestige the route to a node before a
connection is established. Go to menu 12, choose option 3 to see menu 12.3 shown next.
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment= Static Ethernet Addr Timeout (min)= 0
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set=2
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies=
Press ENTER to Confirm or ESC to Cancel: