Filter
Top Products
Prestige 791R G.SHDSL Router
Figure 13-2 SNMP Configuration
Table 13-1 SNMP Configuration
FIELD DESCRIPTION EXAMPLE
SNMP:
Get Community
Type the Get Community, which is the password for the incoming
Get- and GetNext requests from the management station.
public
Set Community
Type the Set community, which is the password for incoming Set
requests from the management station.
public
Trusted Host If you enter a trusted host, your Prestige will only respond to SNMP
messages from this address. A blank (default) field means your
Prestige will respond to all SNMP messages it receives, regardless
of source.
0.0.0.0
Trap:
Community
Type the trap community, which is the password sent with each
trap to the SNMP manager.
public
Destination Type the IP address of the station to send your SNMP traps to. 0.0.0.0
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
13.4 SNMP Traps
The Prestige will send traps to the SNMP manager when any one of the following events occurs:
Table 13-2 SNMP Traps
TRAP # TRAP NAME DESCRIPTION
1 coldStart (defined in RFC-1215) A trap is sent after booting (power on).
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Hgst= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
SNMP Configuration 13-3