Filter
Top Products
Prestige 791R G.SHDSL Router
6.2 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the main
menu, enter 3 to open the menu as follows.
Menu 3 - Ethernet Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 6-3 TCP/IP Ethernet Setup
6.2.1 LAN Port Filter Setup
In this menu type 1 to open Menu 3.1- LAN Port Filter Setup. Use this menu to specify filter set(s) that
you want to apply to Ethernet traffic. You seldom need to filter Ethernet traffic; however, the filter sets may
be useful for blocking certain packets, reducing traffic and preventing security breaches.
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 6-4 LAN Port Filter Setup
If you need to define filters, please read the Filter Configuration chapter first, then return to this menu.
6.2.2 IP Alias Setup
Use Menu 3.2 to configure the first network. To edit Menu 3.2, enter 3 from the main menu to display
Menu 3 — Ethernet Setup. When menu 3 appears, press 2 and press [ENTER] to display Menu 3.2 —
6-6 LAN