Filter
Top Products
Prestige 791R G.SHDSL Router
11-22 NAT
Step 2. Then enter 15 from the main menu.
Step 3. Enter 1 to configure the Address Mapping Sets.
Step 4. Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then
enter 1 for the Select Rule field. Press [ENTER] to confirm.
Step 5. In menu 15.1.1.1, select Type as One-to-One (direct mapping for packets going both ways),
and set the local Start IP as 192.168.1.10 (the IP address of FTP Server 1) and the global Start
IP as 10.132.50.1 (our first IGA). See the figure below.
Figure 11-19 Example 3 - Menu 15.1.1.1
Step 6. Repeat the previous step for rules 2 to 4 as outlined above.
Step 7. When finished, menu 15.1.1 should look as follows.
Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Start= 192.168.1.10
End = N/A
Global IP:
Start= 10.132.50.1
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.