Filter
Top Products
Prestige 791R G.SHDSL Router
Internet Access 7-5
7.7 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in Menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information from your ISP and telephone
company.
Use the following table to record your Internet Account Information. Note that if you are using PPPoA or
PPPoE encapsulation, then the only ISP information you need is a login name and password. You only need
to know the Ethernet Encapsulation Gateway IP address if you are using ENET ENCAP encapsulation.
Table 7-1 Internet Account Information
FIELD DESCRIPTION YOUR INFO
System Name Name of the Prestige (optional).
Service Name
(PPPoE
Encapsulation)
Enter the PPPoE service name if the ISP
supplies one. Enter “any” if the ISP does not
assign you one.
Encapsulation
PPPoE, RFC1483, PPPoA or ENET ENCAP.
Multiplexing
LLC-based or VC-based. If this information is
not given, use the default.
VPI Enter your Virtual Path Identifier here.
VCI Enter your Virtual Channel Identifier here.
My Login Enter the login name assigned by your ISP (for
PPPoA/PPPoE only).
My Password Enter the password associated with your ISP
assigned My Login (for PPPoA/PPPoE only).
Idle Timeout
(PPPoE or
PPPoA)
Enter the time lapse, in seconds, before you
automatically disconnect from the PPPoE or
PPPoA server.
IP Address Enter if your IP address is not dynamically
assigned.
Network Address
Translation
Full Feature, SUA Only or None.