Filter
Top Products
Prestige 642R Series ADSL Router
8-16 Filter Configuration
The table below describes the IPX Filter Rule:
Table 8-7 IPX Filter Rule Menu Fields
Field Description
IPX Packet Type Enter the IPX packet type (1-byte in hexadecimal) you wish to
filter.
The popular types are (in hexadecimal):
01 – RIP
04 – SAP
05 - SPX (Sequenced Packet eXchange)
11 - NCP (NetWare Core Protocol)
14 - Novell NetBIOS
Destination/Source
Network #
Enter the destination/source network numbers (4-byte in
hexadecimal) of the packet that you wish to filter.
Destination/Source Node
#
Enter in the destination/source node number (6-byte in
hexadecimal) of the packet you wish to filter.
Destination/Source
Socket #
Enter the destination/source socket number (2-byte in
hexadecimal) of the packets that you wish to filter.
Destination/Source
Socket # Comp
Select the comparison you wish to apply to the
destination/source socket in the packet against that specified
above.
Operation This field is applicable only if one of the Socket # fields is 0452
or 0453 indicating SAP and RIP packets. There are seven
options for this field that specify the type of the packet.
z None.
z RIP Request.
z RIP Response.
z SAP Request.
z SAP Response.
z SAP Get Nearest Server Request.
z SAP Get Nearest Server Response
Once you have completed filling in Menu 21.6.3 - IPX Filter Rule, press [
ENTER
] at the
message [Press Enter to Confirm…] to save your configuration, or press [
ESC
] to cancel.
This data will now be displayed on Menu 21.1 - Filter Rules Summary.