Filter
Top Products
Prestige 642R Series ADSL Router
Hardware Installation & Setup 2-5
The following is an example installation for the P642 with ISDN.
Figure 2-5 P642 with ISDN
2.7 Power Up Your Prestige
At this point, you should have connected the console port, the ADSL line, the Ethernet port and the power
port to the appropriate devices or lines. You can now apply power to the Prestige.
Step 1. Initial Screen
When you power up your Prestige, it performs several internal tests as well as line initialization. After the
initialization, the Prestige asks you to press [ENTER] to continue, as shown.
Figure 2-6 Power-On Display
Step 2. Entering Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:a0:c5:01:23:45
HWSAR (FPGA) : programming (11969) ... done
HWSAR (FPGA) : testing ... done
Wan Channel init ........ done
Loading ADSL modem F/W
............................................... done
Press ENTER to continue...