Filter
Top Products
Prestige 642R Series ADSL Router
System Maintenance 10-9
10.3 Diagnostic
The diagnostic facility allows you to test the different aspects of your Prestige to determine if it is working
properly. Menu 24.4 allows you to choose among various types of diagnostic tests to evaluate your system,
as shown:
Figure 10-9 Menu 24.4 - System Maintenance - Diagnostic
Follow the procedure below to get to Diagnostic:
Step 1. From the Main Menu, enter 24 to open Menu 24 - System Maintenance.
Step 2. From this menu, enter 4 to open Menu 24.4 - System Maintenance - Diagnostic.
The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the
connections.
Table 10-4 System Maintenance Menu Diagnostic
Field Description
Reset ADSL This command re-initializes the ADSL link to the telephone company.
Ping Host This diagnostic test pings the host, which determines the functionality of the
TCP/IP protocol on both systems and the links in between.
Reboot System This option reboots the Prestige.
Command Mode This option allows you to enter the command mode. This mode allows you to
diagnose and test your Prestige using a specified set of commands.
10.4 Transferring Files - Filename conventions
The configuration file (often called the romfile or romfile-0) contains the factory default settings in the
menus such as password, DHCP Setup, TCP/IP Setup etc. It arrives from ZyXEL with a name of
Menu 24.4 - System Maintenance - Diagnostic
ADSL
1. Reset ADSL
TCP/IP
12. Ping Host
System
21. Reboot System
22. Command Mode
Enter Menu Selection Number:
Host IP Address= N/A