Filter
Top Products
Prestige 642R Series ADSL Router
Filter Configuration 8-17
8.3 Example Filter
Let’s look at the third default ZyXEL filter, TELNET_WAN (see Figure 8-6) as an example. Please see the
PNC Disk for more example filters. This filter is designed to block outside users from telnetting into the
Prestige.
Figure 8-13 Telnet Filter Example
Step 1. Enter 21 from the Main Menu to open Menu 21 - Filter Set Configuration.
Step 2. Enter the index of the filter set you wish to configure (in this case, 3) and press [ENTER]
.
Step 3. Enter a descriptive name or comment in the Edit Comments field (in this case TELNET_WAN)
and press [ENTER].
Step 4. Press [ENTER] at the message: [Press ENTER to Confirm…] to open Menu 21.3 - Filter Rules
Summary.
Step 5. Enter 1 to configure the first filter rule (the only filter rule of this set). Make the entries in this
menu as shown in the following figure: