Filter
Top Products
Prestige 642R Series ADSL Router
System Maintenance 10-21
Figure 10-24 System Maintenance - Time and Date Setting
Table 10-8 Time and Date Setting Fields
Field Description
Use Time Server when
Bootup
Enter the time service protocol that your timeserver will send when the
Prestige powers up. Choices are Daytime (RFC-867), Time (RFC-868),
NTP (RFC-1305) and None. The main differences between them are
the format, e.g., the Daytime (RFC 867) format is
day/month/date/year/time zone of the server while the Time (RFC-868)
format gives a 4-byte integer giving the total number of seconds since
1970/1/1
at 0:0:0. The NTP (RFC-1305) format is similar. Not all
timeservers support all protocols, so you may have to check with your
ISP/network administrator or use trial and error to find a protocol that
works. If you select None (this is the default value), you can enter the
time manually but each time the system is booted, the time & date will be
reset to
1970/1/1
0:0:0.
Time Server IP Address Enter the IP address of the your timeserver. Check with your
ISP/network administrator if you are unsure of this information.
Current Time:
New Time Enter the new time in hour, minute and second format.
Current Date:
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time: 00 : 00 : 00
New Time (hh:mm:ss): 00 : 04 :42
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= GMT
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.