A SERVICE OF

logo

34-5
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 34 Configuring Twice NAT (ASA 8.3 and Later)
Configuring Twice NAT
Detailed Steps
To configure dynamic NAT, perform the following steps:
Step 1 Choose Configuration > Firewall > NAT Rules, and then click Add.
If you want to add this rule to section 3 after the network object rules, then click the down arrow next to
Add, and choose Add NAT Rule After Network Object NAT Rules.
s
The Add NAT Rule dialog box appears.
Step 2 Set the source and destination interfaces.