Filter
Top Products
20 COREBUILDER 6000 EXTENDED SWITCHING SOFTWARE REVISION 8.2.3
STP linkState Changes
The linkState of a port is now a factor in determining the Spanning Tree port
state. This change helps prevent bridge loops when making network
connections to previously inactive ports.
The bridge port summary and the bridge port detail screens include a new
linkState column.
To display the bridge information:
1 From the top level of the Administration Console, enter:
bridge port summary
OR
bridge port detail
The system prompts you for slot number(s).
2 Enter the number(s) of the slot(s) or
all to view port parameters for all
bridges in the system.
The system prompts you for the port type.
3 Enter
Ethernet
The system prompts you for port number(s).
4 Enter the number(s) of the port(s) or
all to view port parameters for all
ports on the bridge.
Sample screen showing the display after the changes:
Top-Level Menu
system
ethernet
fddi
tokenring
➧bridge
ip
snmp
analyzer
script
logout
display
mode
lowLatency
ipFragmentation
ipxSnapTranslation
trFddiMode
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTime
stpForwardDelay
stpGroupAddress
srBridgeNumber
➧port
packetFilter
vlan
➧summary
➧detail
multicastLimit
stpState
stpCost
stpPriority
srRingNumber
srHopLimit
address
port rxFrames rxDiscards txFrames
FDDI 1 0 0 0
Fast Ethernet 1 0 0 0
Ethernet 2 59243130 0 866810375
... ... ... ...
port portId fwdTransitions
FDDI 1 0x8001 0
Fast Ethernet 1 0x8002 0
Ethernet 2 0x8003 0
... ... ...
port stp linkState state
FDDI 1 enabled n/a forwarding
Fast Ethernet 1 enabled down disabled
Ethernet 2 enabled up forwarding