Filter
Top Products
Administering Multicast Tunnels A-7
Defining a
Multicast Tunnel
To define a multicast tunnel:
1 From the top level of the Administration Console, enter:
ip multicast tunnel define
2 Enter the slot(s) of the switching module for which you want to define a
multicast tunnel.
3 Enter the index number(s) of the interface(s) with which you want to
associate a multicast tunnel.
4 Enter the IP address of the destination multicast router.
The IP address of the destination multicast router must be a remote address.
The destination router cannot be directly connected to the same
subnetworks as the local IP address.
5 Enter the DVMRP metric value of the tunnel.
6 Enter the Time To Live (TTL) threshold of the tunnel.
7 Enter the rate limit of the tunnel.
Example:
Select IP stack by slot {2,3,7,9-12|all} [9]:
Enter an IP interface index [1]:
2
Enter remote IP address: 192.9.200.40
Enter tunnel DVMRP metric [1]: 1
Enter tunnel TTL threshold [1]:
Enter tunnel rate limit [0]:
Top-Level Menu
system
ethernet
fddi
tokenring
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
➧multicast
udpHelper
routing
icmpRouterDiscovery
rip
ping
statistics
dvmrp
igmp
interface
➧tunnel
routeDisplay
cacheDisplay
display
➧define
remove