Filter
Top Products
Defining VLAN Information for an HSI Switch Engine D-5
9 Enter the subnetwork mask.
Example:
menu option (bridge/vlan): define
Select bridge(s) by slot (2-3,5,7,9-12) [2]: 5
Enter Protocol Suite (IP,IPX,Apple,XNS,DECnet,SNA,
Vines,X.25,NetBIOS,default):
IP
Enter Integer VLAN Identifier: 1
Enter VLAN Name: SD Marketing
Ports 1-2=FDDI, 3-18=Ethernet
Enter port(s) (1-18|all):
1,3-5
Layer 3 Address (undefined, defined): defined
Enter IP Subnet Address: 158.111.122.0
Enter subnet mask [255.255.0.0] 255.255.255.0
The maximum number of VLANs you can define on a single bridge is 32.
Defining VLAN
Information for
an HSI Switch
Engine
Follow these steps to create a VLAN definition:
1 From the top level of the Administration Console, enter:
bridge vlan define
2 Enter the slot number for the bridge.
3 Enter the appropriate protocol suite:
(IP,IPX,Apple,XNS,
DECnet,SNA,Vines,X.25,NetBIOS,default
)
4 Enter the integer of the VLAN interface identifier.
5 Enter the VLAN name.
6 Enter the number(s) of the port(s) or
all to assign all ports on the bridge in
the specified slot to the VLAN.
You are prompted to enter the number(s) of the port(s) that can be
assigned to the VLAN.
Top-Level Menu
system
ethernet
fddi
tokenring
➧bridge
ip
ipx
appletalk
snmp
analyzer
script
logout
display
mode
lowLatency
ipFragmentation
ipxSnapTranslation
trFDDIMode
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTIme
stpForwardDelay
stpGroupAddress
srBridgeNumber
port
packetFilter
➧vlan
summary
detail
➧define
modify
remove