Filter
Top Products
Displaying Routes A-9
The following display shows all available multicast routes:
Table A-1 describes the fields in the route display.
Multicast Routing Table (2598 entries)
Origin-Subnet From-Gateway Metric Tmr In-If Out-Ifs
157.88.29.1/32 137.39.229.98 18 25 T1 I1
137.39.2.254/32 137.39.229.98 5 25 T1 I1
131.215.125.236/32 137.39.229.98 14 25 T1 I1
130.118.106.254/32 137.39.229.98 10 25 T1 I1
129.127.118.12/32 137.39.229.98 10 25 T1 I1
129.127.110.12/32 137.39.229.98 10 25 T1 I1
129.127.110.11/32 137.39.229.98 13 25 T1 I1
129.127.110.5/32 137.39.229.98 10 25 T1 I1
129.95.63.12/32 137.39.229.98 13 25 T1 I1
129.95.63.11/32 137.39.229.98 31 25 T1 I1*
129.95.63.9/32 137.39.229.98 13 25 T1 I1
129.95.63.8/32 137.39.229.98 13 25 T1 I1
129.95.63.6/32 137.39.229.98 13 25 T1 I1
129.95.63.2/32 137.39.229.98 13 25 T1 I1
129.95.48.4/32 137.39.229.98 13 25 T1 I1
129.95.48.3/32 137.39.229.98 13 25 T1 I1
129.95.48.2/32 137.39.229.98 13 25 T1 I1
Table A-1 Field Attributes for Multicast Route Display
Field Description
Origin-Subnet The source address and the number of bits in the subnetwork
From-Gateway The interface address of the gateway
Metric The hop count
Tmr The amount of time, in seconds, since the routing table entry was
last reset
In-If
1
Interface number on which that gateway is connected. Traffic is
expected to originate from this interface.
T represents the tunnel; P denotes that a prune has been sent to
this tunnel.
Out-If
1
Set of interfaces that the traffic will be flooded out on. I repre-
sents the interface.
1
In-If and Out-If Together, these attributes define a Spanning Tree configuration.
The system disables interfaces that comprise loops.