Filter
Top Products
D-4 APPENDIX D: ADMINISTERING VLANS
Defining VLAN
Information for a
Traditional Bridge
Follow these steps to create a VLAN definition for a traditional bridge, such
as an EFSM or a TMM:
1 From the top level of the Administration Console, enter:
bridge vlan define
2 Enter the slot number for the bridge.
3 Enter the appropriate protocol suite:
(IP,IPX,Apple,XNS,DECnet,
SNA,Vines,X.25,NetBIOS,default
)
4 Enter the integer of the VLAN interface identifier.
5 Enter the VLAN name.
6 Enter the number(s) of the port(s) or
all to assign all ports to the VLAN.
You are prompted to enter the number(s) of the port(s) that can be
assigned to the VLAN.
If you did not choose the IP protocol suite for this VLAN, you have
completed the steps for defining the VLAN.
If you selected the IP protocol suite, follow these steps:
7 Enter
defined to use layer 3 subnet addressing and continue with steps 2
and 3, OR enter
undefined to not use layer 3 addressing.
8 Enter the IP subnet address.
Top-Level Menu
system
ethernet
fddi
tokenring
➧bridge
ip
ipx
appletalk
snmp
analyzer
script
logout
display
mode
lowLatency
ipFragmentation
ipxSnapTranslation
trFDDIMode
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTIme
stpForwardDelay
stpGroupAddress
srBridgeNumber
port
packetFilter
➧vlan
summary
detail
➧define
modify
remove