3Com 3CR858-91 Network Router User Manual


 
30 CHAPTER 4: RUNNING THE SETUP WIZARD
Dynamic IP Address Mode
Figure 14 Dynamic IP Screen
1 Some ISPs require a host name. If your ISP has this requirement, enter the
host name in the Host Name text box .
2 Either:
If your ISP requires an assigned MAC address, enter the values for a
MAC address. Or,
If the computer you are now using is the one that was previously
connected directly to the cable modem, select Clone.
3 Click Next. The DNS screen displays. Refer to “DNS”
on page 35.