Filter
Top Products
70 CHAPTER 5: ROUTER CONFIGURATION
11 Type a name for the Remote Party ID in the text box next to the
drop-down list. This must be unique for each connection rule that you
create.
12 Click Apply to save the settings.
Adding a PPTP
Connection
To add a PPTP Connection, or to edit an existing PPTP connection:
1 In the VPN screen, click Add, or click Edit to edit an existing connection.
2 At the Tunnel Type drop-down list, select PPTP. The screen shown in
Figure 47
displays.
Figure 47 VPN Tunnel Configuration - PPTP Screen
3 Enter a name for the tunnel at the Tunnel Name text box.
4 Enter the user name that the remote VPN client will use to connect in the
User name text box.
5 Enter the password that will need to be supplied to connect in the
Password text box.
6 Type in an Idle Timeout. This is the amount of time, in minutes, that you
want the connection to remain inactive before it times out. Enter 0 if you
do not want the connection to timeout.
7 Select either the PPTP Server or PPTP Client radio button. If you select
PPTP Client, enter the following information:
■ Check the Auto reconnect check box if you want to re-connect
automatically after the PPTP session ends or is dropped.