46 CHAPTER 5: ROUTER CONFIGURATION
PPTP
To configure the PPTP connection for your Router:
1 Select PPTP and then click Next. The PPTP screen displays (see Figure 27).
Figure 27 Internet Settings - PPTP Screen
2 Enter your PPTP server address in the PPTP Server Address text box.
3 Enter your PPTP user name in the User ID text box.
4 Enter your PPTP password in the Password text box, and enter it again in
the Retype Password text box.
5 Type in an Idle Timeout. This is the amount of time you want the PPTP
Server to remain inactive before the session is ended.
6 Either:
■ Check the Get IP by DHCP check box if you want to obtain the IP
information from a DHCP Server on the network.
With this check box enabled, you can click Release to release the WAN
IP Address for the Router, or click Renew to renew the current WAN IP
Address, using DHCP.
Or:
■ If your ISP has provided you with IP address information, enter the IP
Address, Subnet Mask and Default Gateway in the text boxes
provided, or
7 Check all of your settings, and then click Apply.